Mini and Micro Torches

Category:

Product Description

Mini and Micro Torches
 Mini and Micro Torches Ex certificate Mini and Micro Torches IECEx certificate Mini and Micro Torches CE 1180 certificate
  • ATEX Directive Compliant
  • IECEx Scheme Certified
  • T4/T5 temperature class
  • Ultra small size
  • Lightweight, ergonomic design
  • Proven impact resistance
  • Single handed switching
  • Switch protection shroud
  • Integral pen style pocket clip
  • IP67 water and dust tight
  • Gas and Dust Approval (M-20 Not Dust approved)
  • Group I Mining Approval

 Mini Switch

Downloads

Leaflet – Mini and Micro Torches
Instruction manual – Mini and Micro Torches
Certificate – ATEX Certificate
Certificate – IECEx Certificate

Mini and Micro Torches

THE MICRO AND MINI TORCHES USE HIGH-TECH LIGHT SOURCES TO GIVE IMPRESSIVE PERFORMANCE WITH A COMPACT SIZE, DESIGNED FOR EASY POCKET STORAGE, AND ARE CE MARKED TO THE ATEX DIRECTIVE AND IECEX CERTIFIED FOR SAFE USE IN POTENTIALLY EXPLOSIVE GAS, VAPOUR, MIST OR DUST ATMOSPHERES, WHERE A T4 OR T5 TEMPERATURE CLASS PERMITS. ALL MODELS ARE APPROVED TO GROUP I FOR USE IN MINING APPLICATIONS.

The LED models; M-10 Micro, M-40 and M-60 Minis are approved as Category 1 equipment for use in Zones 0, 1 and 2, and M-20 Xenon Mini is approved as Category 2 equipment for use in Zones 1 and 2.

The M-10 Micro has a single white 5mm ‘Nichia’ LED light source and is powered by four alkaline LR44 ‘button cells’, giving an impressive beam with a two hour duration from a very compact size. The M-20 Mini uses a Xenon filament bulb powered by two LR03 ‘AAA’ cells, giving an excellent narrow beam of light with good range and up to 2.3 hours duration. The M-40 Mini has a cluster of three white 5mm ‘Nichia’ LEDs, and the M-60 Mini uses a single high power Cree LED giving remarkable light output; both products are powered by three alkaline LR1 ‘N’ cells giving up to ten hours of usable light with the M-40 and up to 3.5 hours* of usable light with the M-60. All supplied with cells.

The Micro and Mini Torches have an ergonomic design and are constructed from high quality thermoplastic resin, with excellent impact and chemical resistance and the polycarbonate lens is set-back within the lens ring to minimise risk of damage. All models have a lanyard hole (M-10 Micro supplied with neck cord), an integral pocket clip for secure retention and to prevent roll on a flat surface, and a push-button for single-handed switching, which is shrouded to guard against accidental operation. All models are certified IP67, sealed against water/dust ingress.

Technical Specifications
 
Mini and Micro Torches technical specifications

Light Output
M-10
Spot Beam (approx. 13°)
Peak luminous intensity at 2.5m 8 lux

M-20
Spot Beam (approx. 6°)
Peak luminous intensity at 2.5m 100 lux

M-40
Spot Beam (approx. 18°)
Peak luminous intensity at 2.5m 15 lux

M-60*
Spot Beam (approx. 8°)
Peak luminous intensity at 2.5m 275 lux

Product Reference
M-10
M-20
M-40
M-60
Product Description  LED Micro Torch Xenon Mini Torch LED Mini Torch 1W LED Mini Torch
Code  Industrial II 1 GD Ex ia IIC T5 (Ta=50°C) tD A20
IP67 T80°C

I M2/II 2G Ex ib I Mb/IIC T4 Gb

(-40°C ≤Ta≤ +40°C)

IP67

I M1/II 1GD Ex ia I Ma/IIC T4 Ga

(-40°C ≤Ta≤ +50°C)

Ex ia IIIB T125°C Da IP67

I M1/II 1GD Ex ia I Ma/IIC T4 Ga

(-40°C ≤Ta≤ +50°C)

Ex ia IIIB T130°C Da IP67

 

 Mining I M1 Ex ia I IP67 I M2 Ex ib I IP67 I M1 Ex ia I  IP67
Type of Protection  “ia/ib” Intrinsic Safety
Area of Class (Gas)  Zones 0, 1 & 2 Zones 1 & 2 Zones 0, 1 & 2
Temp. Class (Gas)  T5 T4
Ambient Temp. -20°C to + 50°C -40°C to + 40°C -40°C to + 50°C
Area of Class (Dust)  Zone 20, 21 & 22 Zone 20, 21 & 22
Max Surface Temp. (Dust)  80°C 125°C 130°C
Certification  Baseefa06ATEX0084 – IECEx BAS 06.0023
Enclosure  Impact Resistant Thermoplastic, Electrostatic Non-hazardous
Lens  Polycarbonate
Beam Type  Medium Spot Narrow Spot Medium Spot
Light Source    Part No. M-201
Type 1x5mm LED White (Nichia) Xenon Filled
Filament Bulb
3 x 5mm LED White (Nichia) 1 x High Power Cree LED
Rating 2.3V 0.3A 1 Watt
Output 30 cd 15 lm 3 x 30 cd Up to 90 lm
Life 25,000 hrs 30 hrs 25,000 hrs
Power Source Part No. M-102 (4 pack) M-202 (2 pack) M-402 (3 pack)
Type  LR44 Primary Cells to IEC60086 LR03 Primary Cells to IEC60086 LR1 Primary Cells to IEC60086
Volts 4 x 1.5V 2 x 1.5V 3 x 1.5V
Light Duration  Up to 2 hrs Up to 2.3 hrs Up to 10 hrs 1.5-3.5 hrs*
Ingress Protection  IP67 to EN60529:1992
Weight (incl. cells)  25g 60g

*M-60 battery duration/light output is dependent on battery make and type.
All information has been gathered under laboratory conditions, the user must regard the values given as approximate.
Changes may be made to the above specification without notification, details are available on request.